Next under Settings click on Compatibility. and make sure the radio button next to VT100 is selected. Launch MacTerminal and configure as follows: Under the Settings Menu, click Terminal. Turn the Mac on and insert your system disk (1.0-6.0.8) containing your copy of MacTerminal (1.1 to 2.2).
#SHEEPSHAVER CD ROM DRIVER MISSING SERIAL#
Plug the Din-8 Connector into one of the serial ports of your serial-to-USB adapter. With the power off, connect the DB-9 connector of the serial cable to the modem port on the back of the 128k.
#SHEEPSHAVER CD ROM DRIVER MISSING INSTALL#
Them all and SheepShaver is hands down the easiest to install andĬonfigure and most reliable for this purpose) and ROM image. SheepShaver Power Mac emulator port for OS X Intel Macs (I tried
If you will be running a CLASSIC MAC EMULATOR UNDER OS X on an Intel Mac you will also need this:ĥ. Proceed to Setup If you will be running CLASSIC EMULATION UNDER OS X G3-G5 Macs. A copy of MacTerminal 1.1 (other versions up to 2.2, the highest I used a 4.x version that came with my PowerPCĦ500, but any version that will run under OS 8 through OS 9.2 shouldĤ. High speed serial version, but it’ designed for Windows and increasesģ. I used the readily available Keyspan USA-28x
Printer cable with the DB-9 connector for the 128k & 512k/e Not asĬommon as the 8-pin to 8-pin but still sold new from many vendors.Ģ. You’ll need a couple of things, some of which you may already have:ġ. Keep in mind this is geared for a Mac 128k, but works equally as well on any Macintosh. If you haven’t yet switched to an Intel Mac, this process is even simpler. That’s why I am pleased to finally offer a solution which is not only easy, but elegant and ultimately a testament to the enduring quality of the Mac conceived almost 25 years ago.
Since the HD-20 was introduced the 128k was written off as some kind of misguided prototype in favor of the 512k and the Plus. As a 128k owner, I’m used to being left behind. Ever since I became nostalgic for my 128k and started to restore it, everywhere I went on the internet looking for resources, I found the same questions being asked: how do I transfer files from my modern Mac to a pre-system 7 Mac with an 800k drive, much less a 400k drive? And every year, Apple has seemingly taken steps to make it even harder, the latest blow being to drop support for AppleTalk & AppleShare altogether.
0 kommentar(er)
